|
Watch our Installation and Operation video located here: Video
We are proud to announce the new V2 Swage It Primer Pocket Swager for the Dillon XL650 bullet press. Included is the mount, the small primer pin, and mounting hardware. Everything that you need to swage .223, .308, or any other calibers that utilize small or large primers. The V2 swager has been redesigned to drastically reduce any mount movement while swaging as well as some other minor design improvements.
Whats Different Between Version 1 vs Version 2?
On our original mount there were just 2 holes drilled into the mount and it would be attached by machine screws with locking washers. For most people that worked well but some complained that the mount would loosen while swaging. On the mount we have drilled and countersunk the holes as deep as we could to do 2 things. 1. By using the largest head sized tapered screws that we could source, the surface area of the tapered head will lock down the mount far better than the original design and 2. By going as deep as we could go with the taper, we are virtually eliminating any flex from the screws. Combine that with lowering the mounting holes by 0.010, the mount will lock into place securely with very little flex or movement. Below are the list of benefits using our swager.
You will not be disappointed in the Swage It S650. We back our products by an unconditional lifetime warranty. If your swager breaks or wears out, just send it back to us and we will send you another free of charge! We are not in any way affiliated with Dillon Precision. |
40 Reviews Hide Reviews Show Reviews
-
scott r
Its pricey buy well made so fast processing on a 650
-
XL 650 PREP RIME SAVER
I have the Dillon swager and still will keep it! I prepped my brass by decapping then wet tumbling. Now I knock out the swagging part at the same time. Easy to install and per the first 2k 556 not a single issue seems not to put wear on the shell plate, nor the ram...
-
saves time
Best thing I've installed for military brass. Streamlines brass preparation.
-
Easy, fast & consistent
This is a great product! Easy to install. Fast!! Does anyone want to buy a manual swage? :)
-
Great Product
Recently spoke with Mark with questions about the Swage It tool. He was very patient as I explained the processes I currently use as well as my concerns relative to the use of the Swage It tool. Went ahead ordered and received the Swage It Combo. Really really fast customer service. I ordered it later in the day on a Wednesday, had it in my hands on Friday afternoon. Have only used it on small primer pockets for rifle, but will never go back to hand swaging again, (have a RCBS swager, similar to Dillon). This unit works very well and is as fast as you can cycle the handle. My current process is to de-prime using a generic de-priming die, swage, then rotary clean with SS media. Presto, clean brass. I highly recommend this tool. Thanks Mark for a great product.
-
Takes the "UGG" out of case prep.
This is awesome and perfect for how I prep brass. Makes a very tedious task a pleasure and a snap! Flawless. Thank you!
-
Quick delivery , worked great
Great product , delivered quickly , easily installed . Cleaned up about 1400 9mm range brass . Worked like a charm .
-
Worth the money
The product arrived in two days (excellent service). I had no problem following the instructions after watching it in action on youtube. Installation was very easy and as others have shared I'm surprised that Dillion does not offer this tool. There is a learning curve with this product...which is how much pressure and travel it takes on all the different brass types. I had a mixed bunch (2000 rounds) of brass with 40% having a military crimp mixed all together. I had a 1% error rate when I was setting in my new primers. This could be my fault, but once again this tool requires a learning curve to understand the travel and pressure involved. I never felt like I applied enough pressure to damage my Dillion or the shell plate. One tip that helped my out was that the hand on the Dillon will just touch my plastic tote tray when the handle is fully depressed to swage the brass. This visual indicator help my know if the brass was fully swaged or if I needed to apply more pressure. I thought in the future I might hook up a limit switch hooked to a light to let me know that I have fully bottomed out the tool. After 2000 rounds I could not see any wear patterns on the tool. -Thanks
-
2nd best accessory I've found for XL 650
I'm a HUGE Dillon fan. I've got all sorts of ad ons on my press. Case feeder (best accessory). sky light, tool bar, strong mount, spent primer chute. The Swage it combo is GREAT. I've got the Dillon Super Swage 600, but now it's up for sale. The Swage it is faster/easier to use, and with the leverage of the XL 650 you can really feel your way easily. Outstanding product!
