We are proud to announce the Swage It Primer Pocket Swager for the Dillon RL550 bullet press. Included is the mount, small primer pin, and mounting hardware. Everything that you need to swage .223, or any other calibers that utilize small primers. Also all of our products ship for free via USPS Priority Mail Shipping within the US.
Below are the list of benefits using our swage.
- Machined from billet aerospace stainless steel
- Properly re-sizing primer pockets cannot be achieved by a spring loaded swage as it will get stuck in the primer pocket. That is why ours is frame mounted.
- The easiest setup available
- Engineered to properly swage on a Dillon RL550
- Our swage actually re-sizes the primer pocket and adds the correct fillet
- Use your case feeder and swage over 650 rounds per hour
- Proudly made in the USA
- Our swagers are protected by U.S. Patent No. 9,494,398.
8 Reviews Hide Reviews Show Reviews
Review title says it all With brass, like many other components, necessary for reloading being in short supply I needed to use all the pieces I have. This wonderful invention has allowed me to do so. Thank you Swage It!
Have done about 200 rounds so far have a universal decaping die swage and deprime one stroke love it one les time to handle 223 rounds. I got more than i ordered love this tool
This is awesome! You install it, run the ram up and pop the primer and then pull the ram down and swage the primer pocket. Ran into a small issue and called Dillon to discuss it with the tech support and was told that use of the product voids the "no BS" warranty. Let the buyer beware.
This product does all that Swage it claims I use a Dillon universal de-cap die to de prime on the down stroke and swage on the up stroke, then clean the brass in a sonic cleaner and re lode. I felt it was a bit over priced however.
I use my Dillon 550b primarily for high volume brass prep. Before now I had to identify the ones with crimps and decrimp each one individually. Having the Swage-It took has over doubled my production. It was worth every penny.
First I will start with the good parts. I like that i can decap and swag at one station. This significantly decreased my swaging time compared to my single stage swager and my brass prep trim swager. I like that it mounts easily to my Dillon Press. It is also physically easier to operate than my single stage press swager and the case prep rotary swager. I have processed and reloaded about 500 pieces of LC 5.56 brass with the Swage it. Of those 500 pieces i have had about 15 pieces that failed to seat a new primer well. The primer pocket retained a bit of a lip and primer would not seat well or the edge of the primer caught on the lip and rolled over. I will say that these results are not much better than the other option i have tried.
The YouTube video was also most helpful. Only wish I had purchased both pins.
Have reloaded for some years and having access to military brass I am not new to swagging. This product is the best there is out there, I believe. I can set up and rework casings so much faster, handling the casings one time. It does not get any better than "SWAGE IT". I am the old school I do not believe in reaming.