|
Watch our Installation and Operation video located here: Video
We are proud to announce the new V2 Swage It Primer Pocket Swager for the Dillon XL650 bullet press. Included is the mount, the small primer pin, and mounting hardware. Everything that you need to swage .223, .308, or any other calibers that utilize small or large primers. The V2 swager has been redesigned to drastically reduce any mount movement while swaging as well as some other minor design improvements.
Whats Different Between Version 1 vs Version 2?
On our original mount there were just 2 holes drilled into the mount and it would be attached by machine screws with locking washers. For most people that worked well but some complained that the mount would loosen while swaging. On the mount we have drilled and countersunk the holes as deep as we could to do 2 things. 1. By using the largest head sized tapered screws that we could source, the surface area of the tapered head will lock down the mount far better than the original design and 2. By going as deep as we could go with the taper, we are virtually eliminating any flex from the screws. Combine that with lowering the mounting holes by 0.010, the mount will lock into place securely with very little flex or movement. Below are the list of benefits using our swager.
You will not be disappointed in the Swage It S650. We back our products by an unconditional lifetime warranty. If your swager breaks or wears out, just send it back to us and we will send you another free of charge! We are not in any way affiliated with Dillon Precision. |
36 Reviews Hide Reviews Show Reviews
-
Good design that needs refining
Swager is a good design but needs to be refined. The swaging tip leaves a sharp edge on the perimeter of the primer pocket that subsequently catches the edge of primers when they are being seated. If the tip of the swaging stem were redesigned to roll back the edges of the crimped primer pocket this would be the perfect primer pocket swaging tool! BTW I am swaging 9mm cases.
-
Shipped 2 of the same Swagers, but ordered combo
The swager works, but i ordered a combo of both small and large primer swagers. I noticed this upon shipment arrival and then sent an email to support. It's been many days since i've asked and no one has responded.
-
Good Product
As Described. Prompt order processing and shipping. Well made, and I am looking forward to installing it on the 650 and seeing how it works.
-
Disregard previously submitted review. Wrong product. My mistake.
I previously mistakenly entered a review for a different product that I just received. Oops. As for the Swage It, I'm very pleased with it too.
-
Exactly as Advertised.
Terrific product. I've got such a product from another manufacturer. The NeoMag beats it by a mile! Saves money too; as it can be used with mags from multiple makes of firearms, not just one. I'm very happy to have found this mag holder and highly recommend it to others. (really easy/fast to draw a mag from too, without having to worry about the mag coming loose in the pocket).
-
GREAT PRODUCT!!!
This product is amazing. It help me cut down on processing time. I was able to process 1500 + 556 cases in no time. And furthermore, customer service was excellent. Thank you guys.
-
time Saving Swage
Works as advertised. Swages without removing any brass.
-
Much Needed for Military Brass
This is one of the best accessories for the 650 that I have come across. It mounts to the machine easily is very well made and fit perfectly. Being able to size an swage the crimped primers in one stroke not only makes processing easy but is the fastest way to process brass. Wish I would have bought it earlier. Bravo for the design and fast service.
-
gets the job done!!!!
The product works great. I have only Swaged and reprimed about 200 223 and did not have a problem with one primer seating properly. I like this product so much I am selling my Dillon super swage 600. The shipping took longer than expected, exactly 7 days to be exact. Other than that no complaints.
