Loading... Please wait...

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7

Swage It S650 Combo

$129.95

 Product Description

Watch our Installation and Operation video located here: Video

We are proud to announce the Swage It Primer Pocket Swager for the Dillon XL650 bullet press. Included is the mount, small and large primer pins, and mounting hardware. Everything that you need to swage .223, .308 or any other calibers that utilize small or large primers. Also all of our products ship for free via USPS Priority Mail Shipping.

Below are the list of benefits using our swager.

  • Machined from billet aerospace stainless steel.
  • Heat Treated / Hardened to ensure longevity.
  • Will not rust like tool steel.
  • Properly re-sizing primer pockets can be achieved because our swager is frame mounted.
  • You will never experience the swaging pin sticking inside the primer pocket or hitting the shell plate.
  • No need to remove the rotary primer disk which means that you can swage in a matter of minutes without the need of time consuming disassembly of the primer system.
  • The easiest setup available.
  • Engineered to properly swage on the Dillon XL650.
  • Our swager actually re-sizes the primer pocket and adds the correct fillet.
  • Use your case feeder and swage over 1000 rounds per hour.
  • Proudly Made In The USA!
  • Patent Pending.

You will not be disappointed in the Swage It S650. We back our products by an unconditional lifetime warranty. If your swager breaks or wears out, just send it back to us and we will send you another free of charge!

We are not in any way affiliated with Dillon Precision.

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

Write review

Showing reviews 1-10 of 30 | Next

  1. time Saving Swage 5 Star Review

    Posted by on Sep 15th 2018

    Works as advertised. Swages without removing any brass.


  2. Much Needed for Military Brass 5 Star Review

    Posted by on Aug 28th 2018

    This is one of the best accessories for the 650 that I have come across. It mounts to the machine easily is very well made and fit perfectly. Being able to size an swage the crimped primers in one stroke not only makes processing easy but is the fastest way to process brass. Wish I would have bought it earlier. Bravo for the design and fast service.


  3. gets the job done!!!! 5 Star Review

    Posted by on Apr 30th 2018

    The product works great. I have only Swaged and reprimed about 200 223 and did not have a problem with one primer seating properly. I like this product so much I am selling my Dillon super swage 600. The shipping took longer than expected, exactly 7 days to be exact. Other than that no complaints.


  4. swage it XL650 5 Star Review

    Posted by on Apr 24th 2018

    Shipping to Canada was quick
    very easy to mount on my press
    now i de-prime , size and swage
    on extra toolhead in one step on the Dillon press
    very happy and would recommend this


  5. Works as advertized 5 Star Review

    Posted by on Apr 12th 2018

    Hand swagging is a pain adn time consuming. I did not realize this product was available and I randomly Googled "Swagger for DIllon 650" and bang, this product came up.
    It came in 2 days and took 2 minutes to install. It is a finely machined component and is actually pretty.
    When you push the Dillon handle forward (same movement as priming) you can feel the punch enter the shell. When you pull pack, it hangs a bit, bit I guess that is part of the swage. I have only used small punch and only on 223 so far. Some are easy and some require more handle pressure. I began putting a small bit of Imperial Case Lube on the punch every 8-10 rounds and that makes the task easier. Since I deprime and resize first, then steel pin tumble, I am not worried about "grease" in my primer pocket.
    The company says that this is no more of a strain on the 650 than pushing the primers.
    So far I like this thing, it has taken hours off of my reloading. Anxious to see what the bigger punch does with 308.
    You do have to check the mounting screw tighness every so often.


  6. Worked perfectly 5 Star Review

    Posted by on Apr 9th 2018

    I had about 1K .223 brass mostly prepared when I ordered the Swage It. I deprimed/sized about 700 of them before the Swage It arrived. I watched the short video, installed it and went to work. I deprimed/sized and swaged 200 rounds, then removed the Swage It and loaded the rounds in an hour! The following day I removed the tool head and only swaged the brass I had prepped. I Swaged just over 700 brass in one hour. This tool is exactly what I was looking for to reduce brass prep time. No issues with depth of Swage, or primers not seating fully or looking like they were crammed in. Getting the feel of the brass as you Swage is different but easy pick up on.


  7. Good quality and a great idea 5 Star Review

    Posted by on Apr 3rd 2018

    I ordered it trying to incorporate swageing into my 650,it not met expectations it exceeded them,great quality product,well built and well engineered, shipping was prompt,it fine perfect and works even better


  8. perfect addition to 650 5 Star Review

    Posted by on Jan 24th 2018

    When reviewing my reloading efficiency I decided to break rifle processing into brass prep and reloading. I use a lot of crimped brass so my swage step needed a serious upgrade to eliminate touching every piece. This tool is the perfect addition to my bench and enabled me to process 500 30-06 cases in an hour.


  9. Best swage on the market! 5 Star Review

    Posted by on Oct 22nd 2017

    Wonderful tool for the 650! Makes processing brass very easy!


  10. Great! 5 Star Review

    Posted by on Jun 29th 2017

    Fast delivery, just a couple days after I purchased them. Easy install and easy to use. Helps with 45 ACP too, I use the large primer tool, and if it doesn't 'feel' right, I know I have a small primer pocket and I eject that one out and move on. Easier than sorting by hand.


Showing reviews 1-10 of 30 | Next

SKU:
S650C
Availability:
Usually ships within 24 hours.
Shipping:
Calculated at checkout

News

newsletter

Connect with us

Facebook